Home / Machinery / Fuels / Diesel / Research seeks to improve diesel fuel quality sensors

Research seeks to improve diesel fuel quality sensors

Agriculture.com Staff 07/25/2010 @ 11:00pm

By LeAnn M. Ormsby, Communications Specialist, College of Agricultural, Consumer and Environmental Sciences, University of Illinois

Sensors currently used to monitor the quality of diesel fuel and biodiesel blended fuels during engine operation are unable to adequately detect certain important fuel quality concerns. Alan Hansen, professor of agricultural and biological engineering at the University of Illinois, and his colleagues are working to develop new technologies to improve these commercially-available sensors.

“Our research is contributing to the development of a sensor that, when placed in the fuel line prior to where the fuel enters a diesel engine, can detect if there are any contaminants in or other problems with the fuel,” Hansen said. “Also, if biodiesel is used, the sensor would determine the quality and quantity of biodiesel entering the engine.”

Biodiesel, a renewable fuel derived from natural oils like soybean oil, is typically blended at 2 to 5 percent with regular diesel fuel.

“In some cases, engine manufacturers will support warranties on engines using higher percentages of biodiesel—up to 20 percent. However, they are reluctant to support engines running too much biodiesel because there is some concern that it would affect the engine in a negative way,” Hansen said.

Hansen is investigating the use of electrochemical sensors to detect contaminants and other quality issues that today’s sensors are missing. By using electrochemical processes, the sensors are expected to be significantly more sensitive to the chemical composition of diesel fuel.

“Electrochemical sensors can be designed to detect specific chemicals, such as sulfur or sulfur-based compounds,” he said. “One could then create a system to warn the operator or shut down the engine when the fuel has high sulfur content.”

Sulfur is an important contaminant to monitor in diesel fuel, as it can contribute to the release of harmful exhaust emissions. Sulfur damages the catalysts in filters that are part of the engine’s after-treatment system. Such filters are needed to comply with the Environmental Protection Agency’s (EPA) strict regulations on emissions levels.

“To stay within the EPA’s emissions limits, it is no longer possible to simply optimize the combustion process. We now have to capture some of the emissions after the engine, using filters or other methods,” Hansen said.

CancelPost Comment
MORE FROM AGRICULTURE.COM STAFF more +

Pineapple Zucchini Bread By: 10/21/2014 @ 1:30pm Yield: 2 loaves (32 slices)Prep: 30 minBake: 50 min at 350°Stand: 10 min3 cups…

Cherry-Berry Banana Bread By: 10/21/2014 @ 1:27pm Number of Servings: 16 Serving Size: 1/2 of a small loaf each Yield: 8…

Crazy About Cranberry Bread By: 10/21/2014 @ 1:21pm Number of Servings: 16Bake: 1 hr to 1 hr 10 min at 350°2 cups all-purpose flour1 cup…

MEDIA CENTERmore +
This container should display a .swf file. If not, you may need to upgrade your Flash player.
Are We In a Climate Change?