All Around the Farm
All Around the Farm: Oil Drain Pan
Hi I'm Mike whoever from Mansfield oil won't tell you about. On wheels with Hard to keep tracking use oil on making a like him but I did this Greenspan the fan has one horse motor. For the ball. walks and agriculture walks. And bumping up sort thing I've seen some plastic ones in the past and then
All Around the Farm: Chemical Trailer
Check out this feature-packed trailer for delivering water and chemicals to the field. From Machinery Show #707Hi I'm Carrie Fisher from -- Iowa and I like to show you my. Semi trailer that carried water and chemicals to the field. There are three tanks -- combined total of roughly 4000 gallons of water. Also in the trailer are involved chemical tanks and some don't Jones of chemical. They can be locked inside the trailer we're gonna take -- arms and so. The safety advantage is that they can't fall off like they would on -- little -- -- trailer. We have through in flying going into the semi trailer that we -- bottom supply tanks another head. And a unique feature of this trailer is where we store our water transfer closures we have to pony for four PVC pipes and restore the whole. -- if we're role in my mouth. Therefore they can not -- were slipped off the side of
All Around the Farm: Sand-blast Containment
This Illinois farmer built his own sand-blast reclamation system. From Show #708
All Around the Farm: Sprayer Tank Frame
Jon Liechty from Berne, Indiana shows off the sprayer tank frame he built to easily load tanks onto a flat bed trailer. From Machinery Show #616very Indiana. This is my prayer -- Raymond made it on a flatbed truck you can take on and off about -- end. About two or three years ago dad gave you the idea that we had two flatbed trailer a lot of things on it when -- used for everything else he's day. Despite warning hearing to. Says he -- and people who design. They hate comes on and off like this when we used for writes six since. Quarter earnings to read for the mainframe and double them up beside each other. And in turn the place to go -- pockets please.
All Around the Farm: Rotating Work Bench
Check out this rotating table made from used brake drums. From Machinery Show #706all got to do this turnaround. Brake drums -- you know scrap iron price they were worn out. And then whatever higher cost you know probably. Forty dollars worth iron on the -- and to be
All Around the Farm: Slide Away Vise
Roger Bruxvoort shows off the vise that he designed to hide under his workbench. From Machinery Show #603Have a cut away in the front which I think. Installed this spring loaded opinion. That holds the whole thing and plus one -- that -- hit all the down on the -- again. Spider bites off -- And underneath. Which is actually on the slide. For the vice -- -- -- -- I had no holes twelve
Sprayer trailer - All Around the Farm
Lance Rezac, from Onega Kansas shows off the 48 foot trailer he uses to transport his sprayer and chemicals. From Machinery Show #202The next wide load you've seen here at the Oakland Hills and Kansas maybe -- -- Coming in -- 48. -- detachable neck trailer he built for his -- this has this spurred
Rolling tool box
David Hamman shows off the rolling tool box he invented for easy access in truck beds on All Around the Farm. From Machinery Show #507 originally aired January 19, 2012.high enough so little they're my physical play. To install a roller rail system it took me about three or four hours to install and and get things sets of rules. Easily -- -- -- she gets did start to -- on that you can spiral with one -- two fingers -- this kind of faltering dollar room. I've had it done -- pic of her over two years now and I really enjoyed using them. -- -- -- farm tires salutes the inventive spirit of the American farmer and his proud to support -- on the farm Firestone farm tires the leader in the field.
Auger bucket - All Around the Farm
This auger for a skid loader bucket makes feeding cattle a snap. From show #607caution that my brother and my dad you're grateful 500 had a beef cattle every year. And I built this -- bucket to make it easier. I have had these local welding job -- the bucket for me I cut all all the pieces had Emeril and all the rest of it together. -- we do is we've just scoop of course we can run alongside our fans find beat -- to -- the -- Values it's all new steel for the -- and then the rest was all scrap parts they used to for the -- up John your -- head. And a local event company -- thought curling around. Then -- put on a variable speed. Valve on their -- can vary the speed isn't going along
Down draft welding table
Check out this farmer built down-draft welding table, featured on the Machinery Show #608got about nine months worth of work. On this table. At a coffee table . 350 to 400 dollars. See more about my downdraft blowing cable and other former ideas go to agriculture. Dot com slash TV.