Machinery Show
Sprayer trailer|
descriptionLance Rezac, from Onega Kansas shows off the 48 foot trailer he uses to transport his sprayer and chemicals. From Machinery Show #202
-
Auger bucket - All Around the Farm
I ambulance packed a farm outside of caution that my brother and my dad you're grateful 500 had a beef cattle every year. And I built this bucket to make it easier. I have had these local welding job the bucket for me I cut all all the pieces had Emeril and all the rest of it together. we do is
caution that my brother and my dad you're grateful 500 had a beef cattle every year. And I built this -- bucket to make it easier. I have had these local welding job -- the bucket for me I cut all all the pieces had Emeril and all the rest of it together. -- we do is we've just scoop of course we can run alongside our fans find beat -- to -- the -- Values it's all new steel for the -- and then the rest was all scrap parts they used to for the -- up John your -- head. And a local event company -- thought curling around. Then -- put on a variable speed. Valve on their -- can vary the speed isn't going along -
Planter tips: Disc openers
Kevin Kimberley shows Dave Mowitz some tips on how to set disc openers and the importance of checking seed tubes.
consistency. It's riding up on right or right yep it's like a butter knife vs the sharp knife into. So then what we've put -- back on -- checked to make sure that it has. An -- and three quarters -
Planter tips: Brush units
Kevin Kimberley explains the proper adjustments for seed meter brush units and when to replace worn units. From Machinery Show #320
-
Planter tips: White and Kinze seed meters
Kevin Kimberley looks at some issues specific to White and Kinze seed meters, and what to look for before you start planting.
-
Planter tips: Finger pick-up
Planter expert, Kevin Kimberley describes his process for preparing seed meters before planting. From Machinery Show #320.
short course for our our listeners today. Because secede metres where the rubber meets the road and I think the best way to start is with the old tried and -- finger pick up and you've -
Planter tips: Pneumatic seed meters
Kevin Kimberley shows Dave Mowitz what to look for on pneumatic seed meters to make sure they operate properly. From Machinery Show #320
-
Planter tips: Chain drive
Kevin Kimberley shares his expertise on what parts need replaced each year on your row units to make the most of your planter this spring. Read More
right here Frist is David. We like him to pull or she'll answer reader think achieves often nature of these religious group because if you break down the field. You can be -- -- -- -- -
Planter tips: Seeds
Kevin Kimberley talks about different seed shapes and sizes and the importance of proper calibration of seed meters. From Machinery Show #320.
a big difference. In 2003 hit, we do corn meters all across United States , right? So we have Nike region, Pioneer, [unk] every company areas. We have every company's corn here at this place and as -
Planter tips: Alignment and level
Kevin Kimberley recommends setting your planter alignment and level during the winter so it performs at its best in the spring.
be fairly level rent it it. These are actually up just a tad bit what we find it trash -- we will get these totally level -- the slight tilt right. Either way. And it depends
trending around the web



