Dealing With Harvest After Snow

 Here are tips for dealing with crop harvest after snow:

  1. The probability of a first snow sticking around is fairly low, but patience is needed to allow the grain and soil conditions to dry before resuming harvest. Whenever possible, wait for the soil conditions to be favorable to avoid compaction and rutting and avoid or minimize tillage in fields with high soil moisture. This may mean waiting for the ground to freeze. Read more tips about minimizing compaction at harvest here.
  2. Harvesting corn or soybean after snow can be problematic. Wetting and freezing causes split pods and seed shattering in soybeans, while crops with wet pods and husks can also be problematic because evaporative cooling may cause plant material to stick to the grain. This results in problems with cleaning the grain properly and is most troublesome when air temperatures are 27°F. to 35°F.
  3. Harvesting grain that is frozen and wet is hard on combines and can potentially damage equipment. Take time to get combine settings correct, take preventive maintenance seriously, and make appropriate repairs.
  4. Consider the trade-off between harvesting wet grain (maybe as high as 25% grain moisture) with in-field yield losses due to delayed harvest. How much in-field yield is tolerable if the alternative is a $1.00-per-bushel drying cost?
  5. Standing corn can withstand overwintering given the right conditions. Grain loss due to delayed harvest is minimal in November (0 to 5 bushels per acre) but has the potential to increase substantially if harvest is delayed into the winter and spring months (up to 60-bushels-per-acre losses; Table 1). Stalk lodging, ear drop, and wildlife feeding are the main causes of yield loss.
  6. Lastly, consider how a delay in harvest until spring affects next year’s crop. Consider factors like potential labor shortages, fertilizer application shifts, additional risk for volunteer corn, and delayed planting.
Read more about

Tip of the Day

Move welding essentials easily

vise-grinder caddy By welding receivers to a large section of steel pipe and adding wheels, I have saved many trips to the workbench. Now I slide my most... read more

Crop Talk

Most Recent Poll

Have you been attending webinars and virtual events to learn from ag product and service providers?