You are here

Check these 5 tire points before planting

Tire failure is frustrating and costly. In 2019, Firestone estimated each hour a flat tire keeps a farmer from planting cost the farm $627.

The window of ideal planting conditions is often small, so being prepared is key. Make sure your tires are ready to roll before the busy season hits. Here are five important things to check before heading to the field.

1. Air pressure

Check the air pressure in tractor and implement tires this spring.

Tires with low air pressure can be damaged by the weight of heavy farm equipment. Overinflating tires leaves less surface area in contact with the ground, causing more slip and soil compaction.

2. Cracks and cords

Continue to inspect tires by looking for cracks, cuts, and exposed cords.

Stubble damage can make tires more prone to costly failure and downtime.

3. Tread

Look over tread depth as well.

“Generally, if there’s only about 20% tread left on there, that doesn’t mean they’re completely worn out, but you start losing traction and get more spin out of them than you should,” explains Dave Paulk of BKT.

Case IH planter and tractor
Photo credit: David Ekstrom

4. Valve stems and caps

Take a look at valve stems to make sure they’re not leaking, and the valve core is free of debris.

Paulk adds, “Make sure they have valve caps on the valve stems because they keep mud and other debris from getting in and around the valve core and causing a leak.”

5. Wheel lug bolts

Finally, check to make sure wheel lug bolts are tight.

“You don’t want loose wheels wobbling around on you,” says Paulk.

Read more about

Tip of the Day

Farmer-Built Tough Trough

one tough trough My new troughs are made of 36-inch drain pipe cut in half. The one in the barn is installed with 6-inch wood screws, flat washers, and... read more

Machinery Talk

Most Recent Poll

What type of podcast content do you want from Successful Farming?