Content ID

297489

Beware getting entrapped in bins

Last fall’s harvest may have set up threat of grain bin entrapment.

Due to the late 2019 harvest, many farmers stored grain at higher than recommended moisture levels this fall. That increases the risk of entrapment if they enter their bins to check out grain quality issues or fix plugged augers, says Gary Woodruff, a grain conditioning expert with GSI.

Woodruff says grain stored above 15% moisture, often related to insufficient drying capacity or relying only on aeration, can cause it to degrade in the bin and become more susceptible to mold.  

“Grain went into bins at a lower quality, higher moisture, and with more fines this fall, which makes this year much more dangerous,” he says. “That’s why we always emphasize that farmers should never enter a bin when there is a risk of becoming entrapped.”

Woodruff recommends that farmers regularly check the quality of their grain this winter. In addition to grain-monitoring controls, he says they should visually inspect their grain at least every other week. “Climb to the bin manhole and, without entering, look at the grain surface to see if there is crusting or any off smells that may indicate a mold issue,” he advises. “Most problems show up on the surface first. It’s best if a sample from the surface is checked for moisture. Any increase in moisture indicates condition problems in the bin.”

Woodruff cautions that entering the bin and walking on the surface runs the risk of the crust breaking and the farmer tumbling into the grain, becoming quickly engulfed. “That’s why we always preach a policy of zero entry,” he says. “But if farmers decide to do so anyway, there are precautions they should take.”

These precautions include:

• Wear a rope and harness to prevent falling into grain if the surface breaks.
• Always have another person be present who can call for emergency assistance if entrapment should happen.
• Lock out all electrical controls so augers cannot run when anyone is in the bin.

Woodruff notes that the only real fix for out-of-condition grain is to unload the bin down to where the affected grain can be removed. This likely means the grain will have to be marketed early, and poor quality may receive a dock at the elevator. Or, if the grain is too out of condition to sell, it will need to be dumped back in the field.

New technology currently in development, GSI GrainViz, will further help farmers monitor and manage grain quality remotely by creating a three-dimensional moisture map using technology similar to that of an MRI or CT scan. Operators can see the moisture content of each individual bushel of grain and its location within the grain mass, without having to enter the bin.

Read more about
Loading...

Tip of the Day

Connected coffee-can carrier

Coffee can tote I made this carrier for screws and other fasteners out of small metal coffee cans (but plastic cans would work, too). They are attached to... read more

Talk in Marketing

Most Recent Poll

Will you have enough on-farm storage for harvest?

I just want to see the responses
43% (26 votes)
Yes
41% (25 votes)
No, it’s going to be a bin-buster
7% (4 votes)
Maybe, depending on yields
5% (3 votes)
No, I am looking at new bins or temporary storage
5% (3 votes)
Total votes: 61
Thank you for voting.